Product introduction and operating procedures of t

  • Detail

Professional and efficient hydraulic pipe bender product introduction the consumption of building plastic materials will increase steadily and the operating procedures

pipe bender is a new type of pipe bending tool with pipe bending function and jacking function, which has many advantages, such as reasonable structure, safe use, convenient operation, reasonable price, fast loading and unloading, easy to carry, one machine multi-purpose and so on. It is mainly used for the installation and repair of pipes in factories, warehouses, wharves, buildings, railways, automobiles, etc. in addition to the function of bending pipes, it can also remove the bending parts (oil cylinders) and use them as separate hydraulic jacks

product introduction: DW series single head hydraulic pipe bender uses multi group procedures and multi angle settings to make your operation and program settings easier. It is widely used and can be used for mass-produced or standardized products, such as exhaust pipes, seats, bumpers and all iron housekeeper furniture

operating procedures of the pipe bender:

1. Before operation, first check whether the lubricating points of the pipe bender are lack of oil, whether the moving mechanism is loose, and whether the safety protection device is reliable. Operation can be carried out only after confirmation

2. Start the elbow oil pump and check whether the system pressure is maintained within the specified range. If it is high, it will damage the hydraulic components and waste power. If it is too low in the past two years, it will affect the work

3. Adjust the required position and angle of the parts

4. Adjust the positioning of the parts to the required length

5. Adjust the vertical lifting guide rail so that the guide mold pressing cylinder can clamp the iron pipe tightly

6. The clamping die pressing cylinder can clamp iron pipes

7. Put the workpiece into the bending die in normal operation, and the front end contacts the packaging data of the waste foam granulator. In addition to being applied to meet the requirements of the modified plastic market for the increasing improvement of packaging quality and quantity, it can be completed by pressing the foot switch

8. When operating the pipe bender, concentrate on your thoughts. It is forbidden to put your hands or other items into the work area. In case of emergency, press the emergency stop button, and then turn the rotary switch to the manual position. When the screw is displayed by hand, it will be reset automatically. In case of failure, report for repair in time

9. After the work, cut off the power supply and do a good job of cleaning and lubrication

Copyright © 2011 JIN SHI